One of the key strengths of the Olympic series is its flexibility. Using the set of Olympic accessories, riders easily can customize the bindings.

We offer a disc kit so that you can quickly move one set of bindings between several boards. Similarly, the step-in kit and bail kit enable you to use either an INTEC interface or the more traditional bail closure system – just by switching out the toe and heel blocks.

For riders who already have INTEC compatible boots and want to move to the Olympic Step-in binding, we have the INTEC heel kit that includes the heel mechanisms and hardware to update your existing boots.

Speaking of hardware, we stock a complete selection of mounting screws and replacement hardware.

Our True Flex Disc is the foundation for all CATEK bindings. The disc's rigid aluminum construction and patented elastomer outer ring transmit load in a gradual, continuous profile to minimize stress concentrations in the board and enable true board flex.

The CATEK disc kit includes everything you need to mount a second board for quick binding changes via the center King Pin. The disc kit is a cost effective alternate to mounting a fleet of boards.

Disc features:
- Patented geometry with elastomer ring for load distribution
- Small 6" diameter board contact zone for true board flex
- Rigid aluminum with anodized finish
- 3° angle setting increments via divots
- Laser engraved angle markings
- 4x4 and 3 hole compatible

Sure, stepping in is convenient, but when we combined INTEC technology with our superior Olympic platform, we were blown away by the performance. The fit and rigidity of our hard coat anodized aluminum INTEC step-in heel blocks and newly designed narrow profile SI Toe Bails is amazing. Additionally, the SI heel block area under the boot has been minimized to help eliminate snow clog upon step-in. The SI kit updates your Olympic Standards to step-in.

Step-in Kit features:
- INTEC heel mechanism compatibility.
- Aluminum SI heel block construction.
- SI heel block shape reduces snow clog
- Easy entry, snug fitting stainless steel SI toe bail.
- Step-in kit includes SI Heel Blocks (2) and SI Toe Bails (2)*

*INTEC Heel Mechanism sold separately

Want to convert your CATEK Olympic Step-ins to the Olympic Standard bail closure? The bail kit is what you need.

Consistent with 9 years of CATEK quality, our bail closure system is the industry benchmark. New this year, the Toe and heel blocks are redesigned for increased strength, increased boot contact area, and include an embedded rubber pad for both boot grip and vibration damping. The aluminum CATEK toe lever remains the same in function with a new contoured look and reduced weight.

Bail kit features:
- Compatibility with DIN ski boots and snowboard specific hard boots
- Newly designed toe and heel blocks
- Embedded vibration/boot grip pad
- Newly contoured toe lever
- 1/4" diameter stainless steel bails
- Easy entry, foldable heel bail design

Make your boots happy. Buy them the INTEC heel kit so that they work with our new Olympic Step-in bindings.

Stepping in is as easy as it sounds. To step out, just pull a small handle at your knee (no bending over) and a cable retracts the INTEC heel pins. Voila, easy consistent release. We buy the INTEC technology because it's good and it works. Try it – your boots will love you.

INTEC Heel Kit features:
– Laterally rigid for high performance
– Quick, effortless step-in convenience
– Cable release system
– Compatibility with INTEC ready snowboard specific hard boots
– INTEC Heel Kit includes INTEC boot heel mechanisms w/cable release system (2, left and right) and associated mounting hardware.

CATEK bindings use only the highest quality metric hardware. All of our fasteners are stainless steel and some have a nylon patch to prevent unintentional loosening.

If you don't see what you need below, send us an email and we'll set you up.

Hardware sets:
Mounting Screws Set: Holds the disc onto the board – with nylon patch (8)
Block Screws Set: Hold the blocks onto the plate (8)
King Pin Set: Includes King Pins (2), Spacers (4), Spherical Nuts (2)
Wrench Set: For adjusting all CATEK hardware. 4mm, 6mm, and 8mm hex keys (1 each)