 |
|
Caron Alpine Technologies, Inc. :: Parts
Spare parts for current models.
Parts
|
| Result pages: |
1 |
2 |
 |
|
|
CATEK Binding Spacers
A simple, tough polycarbonate spacer designed to protect your board from binding point loads.
Our price: $79.00
|
|
|
D3 Elastomer Upgrade Kit
The new D3 "Dual Durometer Dampening" elastomers provide a quiet ride and offer great point-loading protection for titanal boards & lightweight freeride decks.
Our price: $29.00
|
|
|
FR1 Heel Cups (Pair)
Replacement heel cups for Freeride 1 Standard and Pro models. Sold as a pair.
(Not compatible with the FR2 series binding.)
Our price: $20.00
|
|
|
FR2 Hardware Kit
A full set of spare hardware for the Freeride 2 bindings.
Our price: $39.00
|
|
|
Freeride Hardware Kit
A full set of spare hardware for the Freeride bindings. Kit includes 2 Sperical Nuts (10mm), 2 Spacers, 2 King Pins (10mm), 4 & 6 mm Hex Keys, 8 M6x12 Mounting Screws, 8 extra M6x12 Screws, 8 Short Tilt Screws, 4 Long Tilt Screws, 4 Toe Strap Spacers and 4 Toe Strap Screws.
Our price: $29.00
|
|
|
Freeride Nidecker 900 Toothstrap Kit
If we could make them out of aluminum we would! The reality is that Toothstraps are plastic and eventually wear. Don't get stuck on the best powder day of the year!
Note: The Freeride Toothstrap Kit is compatible with the FR1 Pro (Nidecker 900 Carbon) straps only.
Our price: $19.00
|
|
|
Freeride Toe Ramp Kit
The Freeride Toeramps come in Small, Medium, and Large lengths. Aluminum construction guarantees immediate response upon pressuring the Toe. Click Details for sizing.
Our price: $19.00
|
|
|
Freeride Toothstrap Kit
If we could make them out of aluminum we would! The reality is that Toothstraps are plastic and eventually wear. Don't get stuck on the best powder day of the year!
Note: The Freeride Toothstrap Kit is not compatible with the FR Pro (Nidecker 900 Carbon) straps.
Our price: $19.00
|
|
|
Highback (Individual Part)
High performance molded replacement highback compatible with FR1 Std/Pro and FR2 Pro models. (This is not the carbon highback sold with the FR2 Pro LIMITED binding.)
Our price: $15.00
|
|
|
Intec Heel Mechanism Kit
These mount into the heel of Intec compatible hard boots and, in combination with CATEK Step In bindings, allow you to have step in convenience as well as performance. Kit includes everything needed to transform your boots (left and right) to Step In!
Our price: $99.00
|
|
|
Mounting Screws
These hex-head mounting screws are Stainless Steel. 8 Screws per bag.
Our price: $6.00
|
|
|
Olympic Series Long Plate Set
Convert your Olympic Shorts to Longs! The OS2 Long plate is made from 1/2" thick domestic 7075-T6 aluminum and fits all boot sizes.
Our price: $89.00
|
|
|
Olympic Series Short Plate Set
Convert your Olympic Longs to Shorts! The Short plate is made from 3/8" thick domestic 7075-T6 aluminum and fits boot size less than 10 US Men (28.0 MP). This item is compatible the newer style 10mm King Pin.
Our price: $89.00
|
|
|
OS2 Disc Kit
The cost effective solution to mounting up your quiver. The 4x4 or 3-hole compatible OS2 Disk Kit includes everything you need to mount an additional board.
Our price: $69.00
|
|
|
| Result pages: |
1 |
2 |
|
|
|
